Offline mode

Invicta 12-Piece Watch Tool & Sizing Kit - Yellow (ITK002)

Image not found
Image not found
Invicta 12-Piece Watch Tool & Sizing Kit - ITK002 (Watch Cases)
Image not found
Pinch to zoom
Share To:
S
S
S

Invicta

Invicta 12-Piece Watch Tool & Sizing Kit - Yellow (ITK002)

SKU#:ITK002
In stock

This universal kit allows you to size watches, switch out bracelets and straps, change some batteries and make minor repairs with ease! The band opener allows you to remove links from the watch band. A case opener helps you open some case backs to observe the intricate components within. Remove pins from your timepiece by using a pin tool and hammer. These items are accompanied by a plastic stand and screwdrivers go with a variety of screws.
How to Use
Band Opener: This removes the links for the smaller size bands. Lay the bracelet flat on the cradle making sure that the arrows printed on the extension links face away from the tool's push pin. Make sure the link pin and the pin from the tool are properly aligned when pushing the pin out. Please refrain from pushing out at an angle, because the pin may break. Keep in mind that you do not need a lot of force to make these pins come out. If for any reason you are turning the knob and nothing is happening, stop and realign. To reconnect the links, simply push the closed part of the pin against the arrow.
Case Opener: This tool assists in removing a case back that is pressure closed. However, it should not be used if the case back is screwed down. Simply slide the tool through the small gap and pop the case back off.
Stand: Use this to hold the bracelet in place while hammering out the pin to remove or add links for larger sized bands. On the underside of the bracelet links, there will typically be an arrow pointing in the direction the links should be pushed out. Position the pin pusher over the pin to be removed and tap the pin out from the top with the small hammer.
Pin Remover: This allows you to remove the band from the dial. Slip the tool between the band and the case where the spring bar is located. Then use this tool to unhook the spring bar thereby releasing the band.
Package Includes One Band opener, One Case opener, One Hammer, Two Punch pins, One Stand, One Pin Remover, Five Screwdrivers

The Invicta Tool kit is intended to assist you with opening and potentially repairing your watch, when used properly as intended. Please note, however, that the limited warranty that may be applicable for your watch is only valid when the watch is evaluated and handled by Invicta’s official and authorized watch repair center. If you choose to use the Invicta 12-Piece Watch Tool & Sizing Kit on your own, this will automatically void any and all warranties, as applicable.

*In some instances, the colors in the images may slightly differ from the real product.

Share To:
S
S
S

This universal kit allows you to size watches, switch out bracelets and straps, change some batteries and make minor repairs with ease! The band opener allows you to remove links from the watch band. A case opener helps you open some case backs to observe the intricate components within. Remove pins from your timepiece by using a pin tool and hammer. These items are accompanied by a plastic stand and screwdrivers go with a variety of screws.
How to Use
Band Opener: This removes the links for the smaller size bands. Lay the bracelet flat on the cradle making sure that the arrows printed on the extension links face away from the tool's push pin. Make sure the link pin and the pin from the tool are properly aligned when pushing the pin out. Please refrain from pushing out at an angle, because the pin may break. Keep in mind that you do not need a lot of force to make these pins come out. If for any reason you are turning the knob and nothing is happening, stop and realign. To reconnect the links, simply push the closed part of the pin against the arrow.
Case Opener: This tool assists in removing a case back that is pressure closed. However, it should not be used if the case back is screwed down. Simply slide the tool through the small gap and pop the case back off.
Stand: Use this to hold the bracelet in place while hammering out the pin to remove or add links for larger sized bands. On the underside of the bracelet links, there will typically be an arrow pointing in the direction the links should be pushed out. Position the pin pusher over the pin to be removed and tap the pin out from the top with the small hammer.
Pin Remover: This allows you to remove the band from the dial. Slip the tool between the band and the case where the spring bar is located. Then use this tool to unhook the spring bar thereby releasing the band.
Package Includes One Band opener, One Case opener, One Hammer, Two Punch pins, One Stand, One Pin Remover, Five Screwdrivers

The Invicta Tool kit is intended to assist you with opening and potentially repairing your watch, when used properly as intended. Please note, however, that the limited warranty that may be applicable for your watch is only valid when the watch is evaluated and handled by Invicta’s official and authorized watch repair center. If you choose to use the Invicta 12-Piece Watch Tool & Sizing Kit on your own, this will automatically void any and all warranties, as applicable.

*In some instances, the colors in the images may slightly differ from the real product.

Other

Tone

Yellow

Category

Other Accessories

Product Family Code

PF2792

Shipping:
There is a flat rate of $9.99 for ground shipping on domestic orders to all 50 states and the U.S. Territory of Puerto Rico. Not valid for Alaska, Hawaii, or international orders.
View our Shipping Policy
Easy Returns:
Eligible items can be returned for a refund or online credit within 14 days of delivery.
Please note: if your returned order or item is under $99, a $9.99 fee will be deducted from your refund amount along with any shipping fees.
Exclusions apply.
View our Return Policy
Contact our Watch Experts:
For any questions, please contact us by chat, email or phone.
Contact us
Warranty:
All new watches purchased from InvictaStores.com are covered by the 3-year manufacturer’s warranty.
View our Warranty Policy
4.5
Out of 5.0
A graph showing this site's review totals.
Overall Rating
100%
of customers that
buy this product give
it a 4 or 5-Star rating.
Liked our product ?
Liked our product ?
Verified Buyer
“Good ”
March 8, 2025 by Phil (United States)
“Good”
Verified Buyer
“Great ”
February 21, 2025 by RANDALL (FLORIDA , USA)
“Great set to do all sizing yourself, highly recommended”
Verified Buyer
“Great buy”
July 18, 2024 by Jerry (OH - Ohio, United States)
“Saves me money”
Verified Buyer
“Good buy”
Everything was there.
June 18, 2024 by Christopher (MI, United States)
“I haven't used it yet but sure it works”